• 9833865058

  • sales@bipinpharmaequipment.com
filter press

Multi Column Distillation Plant Manufacturer & Suppliers

  • Multi Column Distillation Plant
  • Online Enquiry



Multi Column Distillation Plant

Multi Column Distillation Plant is based on FINN-AQUA design. It consist of specially designed columns which make optimum use of the principles of interstage heat exchange (Multi effect distillation method) to produce pure pyrogen free sterile distilled water for injectables as per IP/BP specification. The vapour with high velocity and under pressure passes over a SPECIALLY DESIGNED SPIRAL BAFFLE system which develops tremendous centrifugal force and thus eliminates any chances of pyrogens carry over in the vapours.

By Multi Effect Distillation method significant energy (75% approx) is saved when compared to the conventional method. All contact parts are made out of AISI 316 quality stainless steel and mirror polished. All pipes and tubes are essentially seamless. The unit is mounted on sturdy m.s. tubular stand and duly painted by epoxy paint.

Operation :

The pre-heated feed water (through condensor) is fed into the first column where 33% of feed water is converted into steam under pressure by outside boiler steam. The pure steam produced in the first column having temperature of 135'c and the remaining feed water goes to the 2nd column. The pure steam is used as a heating media in the 2nd column and converts part of remaining feed water into steam. In the process the steam itself condenses back into water. This process is repeated till the last coulms each working at low temperature & pressure as compared to the one before it. The steam produced in the last column is condensed in the condensor by feed water as well as cooling water. As external heat is required only to convert the 33% of feed water, the heating energy required is reduced by 67%.

Salient Features :

Compact unit, easy to maintain and operate.

Total energy saving is 75% as less heating energy and less cooling water is required.

Pyrogens are removed by centrifugal force developed & specially designed spiral baffle.

Maintenance cost is low as there are no moving parts.

Trouble free performance of multi-stage pump(horizontal)

Provided with Compact control panel board.

All contact parts are s.s.316 quality. All pipes and tubes are seamless and gaskets made form teflon.

Distillate Temperature is quite high.( 90-95')

Distilled water as per IP/BP standards and conductivity less than 1 micromhos/cm.

Scope of supply Includes :

A S.S..316 quality surge tank with float valve to maintain water level.

Feed Water Pump s.s 316

GRUNDFOS pump.

Control panel board with indicating Lamps

Technical specifications:

Industrial steam at 3 bar pressure Industrial steam at 8 bar pressure

Capacity Supply Steam Cooling Water Capacity Supply Steam Cooling Cooling Water
80 40 120 145 44 180
150 48 180 285 85 350
300 97 365 570 170 700
500 130 605 920 275 1130
3000 660 650 550 1650 6770
5000 1200 1100 9585 2875 11795

Zero Hold Up Filter Press 14"

multimill

We export Zero Hold up Filter Press 14" that is intricately designed and helps in effective filtration discharging solid free filtrate. These are in high demand in the domestic market as well as the foreign front and are available in various sizes, material of construction and are precision engineered for flawless operation.

The salient features of our range include the following:

  • BPE Zero hold up horizontal closed filter pressure filter pressure solves the majority of separation problem
  • Additional features from new concept of zero hold up horizontal closed pressure filter
  • Different size range, material of construction and option is available
  • Accommodated from BPE zero hold up horizontal closed pressure filter press range

Technical Specifications :

Model Dia. Of Plates No.of plates Filtering Area m2 Cake Holding Cap.(ltrs) Flow Rate/Hrs Pump size & power
ZH-14 14” 8 0.819 24.75 1500 1”/2Hp
ZH-14 14” 10 1.001 30.25 1700 1”/2Hp
ZH-14 14" 12 1.183 37.75 1900 1”/2Hp

Zero Hold Up Filter Press 18"

multimill

Extensively used for wet and dry granulation, pulverizations etc. in Pharmaceuticals, Chemicals, Cosmetics, Ceramics, Colors, Dyestuff, Food products, our Multi Mill Machine 3 HP is high in performance and appreciated worldwide. These are dimensionally accurate, corrosion resistant and find application in various industries such as Pesticides, Fertilizers, Spices, Detergents, Insecticides, Plastic, and Resins.

Operation :

  • The plate pack assembly consists of plates with interlocking cups, plate rings, and perforated screen sand filter media.
  • Interlocking cups is arranged one above other forms single pipeline.
  • The unfiltered liquid is centrally fed under pressure from bottom inlet.
  • The liquid spreads out equally on each plate fitted with filter media.
  • Solids remain on the filter media and clear filtrate flows through gaps on the supporting rings and collects in the shell, which is led out through outlet pipeline.
  • In this process, solids are evenly distributed on each plate.
  • At the end of the cycle the cake can be maximum dried by applying air on inert gas.

Technical Specifications :

Model Dia. Of Plates No.of plates Filtering Area m2 Cake Holding Cap.(ltrs) Flow Rate/Hrs Pump size & power
ZH-18 18” 10 1.65 55 4000 1 ½”/3hp
ZH-18 18” 12 1.95 65 4600 1 ½”/3hp
ZH-18 18” 15 2.4 80 5500 1 ½”/3hp
ZH-18 18” 24 3.75 125 8200 1 ½”/3hp

Zero Hold Up Filter Press 24"

multimill

Available with us are Zero Hold up Filter Press 24" that are in high demand all across the globe and is dimensionally accurate with sturdy construction. The raw material used in the production of these machines is procured from reliable companies and are stringently checked by our quality controllers so as to ensure that the entire array is of supreme quality and offers maximum functionality.

Operation :

  • The plate pack assembly consists of plates with interlocking cups, plate rings, and perforated screen sand filter media.
  • Interlocking cups is arranged one above other forms single pipeline.
  • The unfiltered liquid is centrally fed under pressure from bottom inlet.
  • The liquid spreads out equally on each plate fitted with filter media.
  • Solids remain on the filter media and clear filtrate flows through gaps on the supporting rings and collects in the shell, which is led out through outlet pipeline.
  • In this process, solids are evenly distributed on each plate.
  • At the end of the cycle the cake can be maximum dried by applying air on inert gas.

Technical Specifications :

Model Dia. Of Plates No.of plates Filtering Area m2 Cake Holding Cap.(ltrs) Flow Rate/Hrs Pump size & power
ZH-24 24” 15 4.162 144 7000 2” /5hp
ZH-24 24” 18 5.035 171 8500 2” /5hp
ZH-24 24” 24 6.625 225 12500 2” /5hp